Method of cutting rare earth alloy

文件类型：PDF文档
文件大小：1353K
A method of cutting a rare-earth alloy with a wire saw, obtained by fixing abrasive grains on a core wire with a resin layers, includes the step of moving the wire saw while a portion of the rare-earth alloy being machined with the wire saw is immersed in a coolant, which is mainly composed of water and has a surface tension of about 25 mN/m to about 60 mN/m at about 25° C., thereby cutting the rare-earth alloy. In the wire saw, an average distance between two of the abrasive grains, which are adjacent to each other in a length direction, is about 150% to less than about 400% of the average grain size of the abrasive grains, an average height of portions of the abrasive grains, protruding from the surface of the resin layer, is about 70% or less of the average grain size of the abrasive grains, and a thickness deviation percentage of the resin layer with respect to the core wire is about 40%.