| 简介 |
Problem To provide a heat resistant metal gasket that is controlled to have a strength level (ordinary temperature hardness) capable of facilitating processing, and has excellent gas leak resistance.
Solution An austenitic stainless steel sheet for a metal gasket, having a chemical composition containing from 0.015 to 0.200% of C, from 1.50 to 5.00% of Si, from 0.30 to 2.50% of Mn, from 7.0 to 17.0% of Ni, from 13.0 to 23.0% of Cr, and from 0.005 to 0.250% of N, all in terms of percentage by mass, containing, as necessary, at least one of Mo, Cu, Nb, Ti, V, Zr, W, Co, B, Al, REM (rare-earth element except for Y), Y, Ca and Mg, with the balance of Fe and unavoidable impurities, having an ordinary temperature hardness of 430 HV or less, having a half width of a peak of an austenite crystal (311) plane in an X-ray diffraction pattern of a cross section perpendicular to a sheet thickness direction of from 0.10 to 1.60°, and having a surface roughness Ra of 0.30 μmm or less. |
客服热线：
手机版
二维码
