| 简介 |
1. The method of the forming of the linearly oriented vineyard, which includes the installation of vertical guides of the supports in the form of the plastic pipes, filled for the sake of cement mortar and the fixation on them of the guiding wire against the appropriate level for the subsequent fastening of the stems of grapes, that is characterized by the fact that preliminarily before the installation of the supports in the form of plastic pipes along them are carried out the through transverse openings by diameter not smaller than the diameter of the guiding wire, but after their installation wire they have before the openings before the consecutive supports, after which fill for the sake of cement mortar for its fixation, after which they [uplotnyayut] the earth around [opory].2. The method of the forming of the linearly oriented vineyard on [p].1, which is characterized by the fact that the length of the guiding wire they select more than the step of the arrangement of one or several supports in the form of plastic pipes and based on two sides its excess length bend also before the filling of the cement mortar through the opening before the supports they have inside the plastic of [truby].3. The method of the forming of the linearly oriented vineyard on [p].1, which is characterized by the fact that between two sequential supports in the form of plastic pipes against the sequential levels have the guides of the wire of the different of [dliny].4. The method of the forming of the linearly oriented vineyard on [p].1, which is characterized by the fact that during outer supports, about the number of levels of the guides of wires, consecutively have the additional plastic pipes of the reduced length and before their filling cement mortar inside them they have available the ends of the guides of [provolok].5. The method of the forming it is linear of [orientirovann] |
客服热线：
手机版
二维码
