| 简介 |
PROBLEM TO BE SOLVED : To facilitate positioning of a wiring terminal for a speed change gear and prevent occurrence of mounting error. SOLUTION : A wiring terminal 10 equipped with a large-diameter part 14 is mounted at the rare end by being inserted in a through hole in a side wall 3 of a speed change gear case. A terminal guide 6 is provided to the inside wall surface of the side wall along the hole edge of the through hole at a prescribed interval with the large-diameter part 14 of a wiring terminal. A terminal guide has a locking piece accommodating part for accommodating locking pieces 16, 16 provided to the outer periphery of the large-diameter part 14. When turning the wiring terminal around in the vicinity of an angle roughly estimated, the locking piece falls into the accommodating part. Therefore, the wiring terminal can be simply positioned at a proper position even in groping work. COPYRIGHT : (C)2005, JPO&NCIPI |
客服热线：
手机版
二维码
