INSTALLATION FOR OBTAINING OF HYDROGEN AND HYDRO-OXIDES OF ALUMINUM FROM ALUMINUM OR ITS ALLOYS

文件类型：PDF文档
文件大小：378K
Useful model relates down the field of inorganic chemistry, or more precisely to the devices for the realization of the methods of obtaining of hydrogen, hydro-oxides of aluminum and its alloys from the production wastes of aluminum of the type of shaving and small pieces of various forms. Installation can be used before the remote accesses from the electric power sources installation it contains the tank, beside which will be given the water and the aluminum withdrawals, the filter, before which stays resultant sediment, the flask Of [bunzona], down which are put on the Buechner funnel, the branch pipe, through which with the aid of the pump formed before the reaction process the water and alkali are sent back at the point of the reactor after washing, the pH-meter, the carbine, through which is achieved the removal of hydrogen, beside the benzine generator as refuelling, beside the fuel cells or beside the balloons, the controller, located near the tank and assuming signals based on the pressure sensor, temperature sensor, sensor, which fixes the level of the filling for the sake of the powder of cylinder, valve and capacity for the alkaline water. Technical result is evinced by the possibility to spend the minimum of electric power, not to use the expensive expendable materials, it is simple before control and design realization. It makes it possible to avoid the addition of rare-earth metals and use of fine dispersed powders of aluminum of different agglomeration.