HIGH STRENGTH Cr-Ni ALLOY MATERIAL AND SEAMLESS PIPE FOR OIL WELL

文件类型：PDF文档
文件大小：651K
[Object] To provide a high strength Cr—Ni alloy material excellent in hot workability and stress corrosion cracking resistance, and seamless pipe for oil well. [Solution] A high strength Cr—Ni alloy material which consists of, by mass percent, C : 0.05% or less, Si : 0.05 to 1.0%, Mn : 0.01% or more and less than 3.0%, P : 0.05% or less, S : 0.005% or less, Cu : 0.01 to 4%, Ni : 25% or more and less than 35%, Cr : 20 to 30%, Mo : 0.01% or more and less than 4.0%, N : 0.10 to 0.30%, Al : 0.03 to 0.30%, O (oxygen) : 0.01% or less, and REM (rare earth metal) : 0.01 to 0.20%, with the balance being Fe and impurities, and also satisfies the conditions in the following formula (1). [in-line-formulae]N×P/REM≦0.40  formula (1)[/in-line-formulae] where P, N, and REM in the formula (1) respectively denote the contents (mass %) of P, N, and REM. The high strength Cr—Ni alloy material may further contain one or more types of W, Ti, Nb, Zr, V, Ca, and Mg, instead of part of Fe.