Jacket " ODNOKISTEVOI " For Tablets Computers, Electronic Books

文件类型：PDF文档
文件大小：116K
FIELD-useful model relates to accessories computer engineering and is intended for improvement of their consumer properties, due to diffusion condensate convenience in operation. The essence of the utility model consists in technical solution of problem diffusion condensate operation convenience tablets computers and electronic books by creating for them such jacket, which would allow brush one hand and ad and perform some extremely necessary control function, being used only in rare cases of pins other hand. Useful model represents a closed envelope, made from sheet (1-2 mm) silicone, with large cut in the form of windows for screen and small functional cutouts for connectors and keys. Large cutout is made so, that along the perimeter of the face part computer bonding of flat side width 10-20 mm. On outer surface of rear part of cover side in the middle as larger side, and small side perpendicularly to them are simultaneously two, three, four wide loops for main phalanges and parallel to them- pupyrchatye of convexity for the stop nogtevymi phalanxes fingers with the aim of holding computer (book) in one hand. Besides a modification is probable jacket with loops only from one side. Jacket through window is put on a flatbed computer (electronic book) by small stretching sides. Due to material from which is made jacket (silicone), provision of reliable fixation of a tablet computer (electronic book) in the jacket. Fingers going, average, unnamed and pinkie are inserted in corresponding loop and in polusognutom state enclose pupyrchatye of convexity, that provides reliable grip computer (book). Large pin is control by pressing on the keys and production of corresponding movements for screen. Technical result is achieved due to industrial flow production of casings of different types in depending on brands and models of tablets computers (electronic books) and several typical size depending on sizes of the human hand. Structurally modules may be made several methods : 1. Casting. 2. Gluing. 3. Mixed method. At each of the method is its advantages and its disadvantages.